Sunday, 20 March 2011

New Module 4031 Tap Looper

This tiny "Blarplette" module is a shift register set up to be a tap programmable looping trigger. Its made from a 4031 CMOS chip which are a little tricky to find. I made a little video of it in action...if you don't want to hear me waffle about the patch then skip to around 2 minutes in.

New module 4031 tap looper from concretedog on Vimeo.

Tuesday, 15 March 2011

Antipodean Matrix MIxer

Great to know that on the opposite side of the world someone has seen my schematic for my matrix mixer and is building one. Find my post with the schematic here.

video of Vampyre's matrix mixer and other projects here

Friday, 11 March 2011

Blarp out and about

Went for a jam last night with some Warm Data colleagues. It was great to just be able to sling Blarp in a backpack and cycle over. It was the first time they'd seen Blarp in the flesh and where amazed at how small it is - 20 cm by 20 cm. If any audio gets posted I'll link it from here.

Monday, 7 March 2011

Portable Project Planning

You know you've got it bad when you can while away a 5 hour train journey plotting and scheming new electronics projects. Getting the appetite up for more building for sure.